Customer Reviews With Photos
The grips for the switch are great and do keep my hands from cramping while playing. I would have given this a 5 star but the thumb stick covers started splitting (as seen in the provided pics) only after a few days of being on my switch. Over all this set is nice and just the grips alone are worth it. I just wish the thumb stick covers didn't split so easily and so soon.
As others have said its way too hard to install. Saw the video, followed step by step, almost drenched the film with the included spray (it was dripping on my console btw!). Even so you have a minute at most to align and push out the air bubbles before it seals and its damn near impossible to move anything around anymore. First attempt was a mess, second was better but ended up with pockets of water/solution still stuck behind the screen. Cant squeegee it too hard because the material easily folds and stretches, its a thinner version of that plastic film auto shops put on your windshield to remind you when to get another oil change, but with adhesive on one side. Trying to squeeze out whatever is left after a few minutes only leaves pinched or folded bubbles. Of course, removing it is impossible (you have to peel it off like a strong sticker) and it ruins the film completely. Leaving it at two stars because it does seem like a decent screen protector on the parts where it actually worked.Going to leave the last film on for a few more days to see if it the pockets eventually dry up. Ill update score if anything changes. See pic, those are not just water droplets, they are under the screen protector.EDIT: Oddly enough they sent a new one, no notice or anything, just arrived unexpectedly. The original bubbles (as shown in pictures) never disappeared so I tried for the third time with the new ones and it went on much more smoothly, so adding another star as final verdict. It is a good screen protector, I can see where the name comes from, and they have great service though I found it odd they never contacted me. However still a very tricky installation which requires some practice and cannot be reapplied once installed because it stretches as you peel it off. Thats especially dangerous for the Switch as it uses a plastic cover on the screen which does lift and feel like it might snap off or break as you peel off the Skinomi Screen Protector. All is well that ends well.
It's a hard case with black and gray mix color. Has space to fit 10 games inside. A mesh bag and a strap for Nintendo to be stap on. Please keep in mind this is for Nintendo lite, not Nintendo switch it will not fit. Manageable to carry!!
I am so happy with my purchase and I recommend it to anyone who loves Splatoon! I have never ordered a skin for any of my consoles but I am so happy I did this time. I expected a very cheap skin quality, but this skin is very pliable. It should not rip while you are applying it if you are careful. The graphics are beautiful. I didn’t use all the pieces that were included because of personal preference and it still looks amazing. I also bought a set of thumb grips to match my skin which was a wise move ( does not come with skin set ) I just hope it stands wear and tear overtime and it probably will. I would buy again!
Was pleased that there was a case to see the design on the switch lite. Seemed a little flimsy out of the package, but once one the switch it seems firm and most buttons are easy to access.
This faceplate was easy to install and matches exactly with the color of the joycon shells and backplate from the same company. All the plastic swaps have been so flawless that I'm considering making my pro controller match as well. Highly recommended.
Maybe it’s just me but the description on the item was a little misleading. I though it came with the charger. But it does not. Other than that works as intended.
UPDATE: The console performs exactly like a US Version. So the only down side is that they don't tell you it's Old Japan Stock & the Free 30 Days of Nintendo Switch Online is expired.Japanese Model! This listing is deceptive! It says English language. As you can see from the pictures, it is NOT English! I'm not sure how this will affect gameplay yet... When I do I will update!
The quality of these Joy-Con shells is top notch. I'm very pleased with the look and feel. The texture of the plastic is smooth, the color is solid and not at all splotchy; it doesn't appear cheap or hand-painted. The replacement cross d-pad button does the job as well as I could have hoped, and feels great. I would have believed this is an official Nintendo product. Highly recommended.**The following paragraph is part review, part cautionary tale. Understand I fully recommend this product. Just make sure you're properly prepared.As far as installation/assembly is concerned, I had some pretty aggravating complications. I was unprepared for how delicate the tact switches (small clicky buttons on the internal boards) are, and how easy it is to damage or rip them off when removing or replacing the ZR and ZL buttons. While forcing off either of these trigger buttons, you have to be extremely careful to not hit the tact switch. The switch is directly beneath the trigger button, and since the button requires considerable pressure to remove/replace, chances of hitting the switch are high. There should be strong emphasis on this in the instructional video, provided by the manufacturer. I was not prepared for this complication, and so ripped off (but somehow did not damage) the ZL tact switch. Because they are so miniscule, I didn't even notice it had dislodged until after I had put it all back together and the trigger wasn't clicking. Putting it back in place was something of a nightmare, as I didn't have precision pliers or a strong, lit magnifier, both of which are CRUCIAL. After getting ZL working, I noticed ZR was not registering, though it was clicking. I took it apart several times hoping to find what was causing the problem. I took it apart one last time as a desperate attempt to fix it before ordering a replacement ribbon cable assembly, and broke the tack switch (actually broke it this time.) I ordered a non-OEM replacement, installed it, and it still wasn't working. Upon further inspection, I noticed the contacts inside the ribbon cable connector were on the bottom, and I had been installing the ribbon cable as if the contacts were on the top. Long story short (too late, I know, apologies), there was nothing wrong with the ZR button when I broke it, but that's unfortunately what it took me to understand what was going on.Again, JUST BE AWARE of these things when installing, and you'll be all set. This is a great product.
I usually suck at putting decals on, but this was super easy.
Looks cheap but works great. Allows you to connect your switch to a second monitor as well as charging your switch. It’s just a one click press of the button to switch back and forth from desktop to monitor play. Has three USB ports for charging your controllers or poke ball plus. No cables are provided. Great for travel or just having to connect to another room. We also use it as a charging dock for the switch lite. Great purchase.
For all Splatoon fans. This case helped solve my kickstand problem! It was cheaper here than it was at GameStop so would recommend!
for the most part, it is sturdy. the flap where i am lightly pulling in the photo is not super sturdy, but i guess since its near the charge port its not a dealbreaker (and a difficult part to be sturdy for such a small sliver of thr TPU material. i was afraid of the smoothness of the back handles not going to hold my grip but i was surprised that they are just fine. I do have a carrying case for my switch (leafy Animal Crossing one) and the switch with the TPU case barely fits, so in order for me to not break my AC zip case, I would most likely need to invest in another case or i'd have to bring the TPU case separately
By taking this thing apart and sanding down a couple parts I was able to get my switch lite to charge on the dock while still having the skull n co grip case on. Just keep in mind you'll also need an angled USB c adaptor.Way better stand than the cheap stuff from China even if it is a bit pricey.Note: If you're going to try to take this thing apart you have to take off the feet and pry up the tabs underneath before the bottom will unhook. Everything else is under the rubber pads and label on the front and back.
I Have Been Using This Replacement Power Bank Since I Received It In The Mail. I Have Mainly Been Using It For My Nintendo Switch And It Works Fantastic. It Keeps My Nintendo Switch Running For A Lot Longer Than Just What It Would On Its Own Battery Charge. I Play My Switch Every Day For Hours. The Unit Is Smaller Than Other Nintendo Switch External Batteries. It Does not Get In Your Way & It Is Very Light.I Have Also Tried The External Battery On My Samsung Android Galaxy S8 & My Kindle Fire & I Am Extremely Happy With No Complaints.I Highly Recommend This Item For All Gamer's Out There.The Pictures Above Show My Nintendo Switch With Just The Bracket & Picture #2 Is The Bracket With The Charging Unit Attached
